Despite the simplicity of the weapon, loading an AK is actually slightly more error-prone, in my experience.
1. You can’t—on most variants—lock the bolt to the rear.
2. Insert the magazine, being sure to insert the front portion of the magazine first, and then rock the magazine up and in, seating it firmly. I watch this get messed up ALL THE TIME. People that hate the AR15, because “it’s too finicky,” end up not seating the front of the magazine properly, or they end up not rocking the magazine all the way in and seating it. In either case, they almost invariably end up spending way too much time messing around with getting it seated properly.
3. Once the magazine has locked into the seated position, try and tug it in the reverse direction, ensuring that it is, in fact, locked in.
4. Use the charging handle to pull the bolt ALL THE WAY TO THE REAR, and let it go. Allow the gun to go into battery under the tension of the spring. Then, grasp the charging handle and perform a press check.
5. Congratulations, you loaded an AK.
Reloads
There are two basic categories of reloads in “combat shooting:” the “speed” or “emergency” reload, and the “tactical” reload, or the “reload with retention.” Speed reloads should be utilized any time your gun runs dry in a fight. This is—again, in my experience—the single most common “malfunction” you will face, using most modern weapons, manufactured by reputable companies.
Tactical reloads, and reloads with retention, are done “when there is a lull in the fight.” Often, you may have to induce that lull yourself. If your partner is providing suppressive fire, and you are getting ready to move, or have just moved, take the time to perform a reload, if you feel you need to.
You are NOT going to know the exact number of rounds you’ve fired. Anyone who tells you that you will is either, a) a savant, or b) full of it. I’ll let you wager your life on which one is more likely.
What you CAN know is a rough estimate of “I’ve fired more than half my magazine,” or “I’ve fired less than half my magazine.” If you think you’ve fired more than half? Take the opportunity to top off, if you’ve got it. If not? Hope you finish the fight before the mag runs out, or that you’ve mastered the speed reload.
For most of us, the chances of needing to speed reload are pretty slim, as a result of “I shot my gun dry.” This is especially true with “normal” CCW pistol work. Nevertheless, there are two considerations here:
1. We’re not just talking about “everyday” CCW encounters here. You get ambushed by a crowd of bad guys, or are dealing with a herd of cannibalistic San Franciscans, post-SHTF, it is entirely plausible that the 18 rounds in your Glock 17, or even the 30 rounds in your AR or AK are not going to be adequate.
2. Stuff happens. Whether you miss a lot, or the dude you shoot just takes a lot of killing, or your magazine breaks after a round or two, there are reasons to practice and master your speed reloads.
Malfunction Clearances
I don’t know how many times I’ve had students in a class—even a more advanced class, ranging from CQB and patrolling classes to vehicle classes—that had a malfunction and suddenly realize they are not qualified for the class they are in because they don’t know how to clear the malfunction. Sometimes, they’re legitimately under-qualified. We back them off, and have them run some of the more remedial aspects. Other times though, they know HOW to do the corrective action, they just don’t KNOW how to do the corrective action—under stress. Their brain just stops and everything falls apart.
Whether you use SPORTS, TAP-RACK-BANG, or transition to your sidearm (which is fine, if you’re close enough for your sidearm to be more efficient than corrective action), this is something that has to be practiced until you don’t even think about it. The only way I know to do that is to set up malfunctions and drill them, over-and-over-and-over-and-over-and-over. Sorry, but “Oh, I did 10 reps of Tap-Rack-Bang last year, in a class,” is not going to cut it. You will fail when you have to do it under pressure.
Practice
During Q2 of my annual training plan, I limit the amount of repetitions I do of my snap-firing and drawstroke drills. I just hit 10-15 dry-fire drills and then move immediately on to working my reload drills dry-fire. When I do live-fire range work, I intentionally download my magazines, randomly loading 5-10 magazines with anywhere from 3-10 rounds. Then, I randomly grab the magazines and stick them in my mag pouches and gun, so I cannot be certain what load is in the gun at any given time. This incurs a “surprise” factor when the reload comes up.
Dry-Fire Speed Reload
Ben Stoeger has written that he likes to see speed reloads in less than 1.1 second. I’ve witnessed guys hit speed reloads—during drills—in less than one second. I generally aim for the actual reload to run just under 1.5 seconds. For most people, for most purposes, anything less than 2.5 seconds is probably adequately impressive. It’s not like you should be standing still, not moving in the middle of a fight, to conduct the reload. You should be moving to a position of cover—if you’re not already there—and then executing the reload. Ideally, of course, your reload should be protected by your partner providing cover, so in either case, 2.5 seconds is more than adequate—as long as it’s legit, and you can hit that time, under stress, without fail.
To set this up, I’ll set a par time on my shot timer that is my current training par time. I will then execute speed reloads, dry fire, consistently hitting 10-15 repetitions under the par time. Then, I’ll drop a hundredth of a second, until I can beat that. When I hit a time that I can’t beat for 10 repetitions in a row, that becomes my new par time for the dry-fire training week.
Dry-Fire Tactical Reloads
First off, I don’t advocate or really even teach—let alone practice—the old fumbling two mags in one hand method of tactical reloads. What I teach and preach and practice is what has become known as the “reload with retention,” that I learned as a cherry private in the Ranger Regiment, with an M16A2. I will drop the partially-expended magazine into my support hand, and stow it away. Then, I will grasp a fresh magazine and insert it into the weapon. It’s demonstrably faster and less error-prone, whether with rifle or pistol.
I don’t really “practice” tactical reloads much anymore. That’s probably not something I should admit to, but it’s true. I’ve got hundreds of thousands of repetitions of performing them, and anytime I change a magazine in a weapon, outside of speed reloads, I get practice in anyway, so I’m not too worried about it. I’ve yet to have it cause a failure.
For novices learning though, setting the tactical reload up, sans ammunition, is pretty simple. Empty magazine goes in the gun, bolt forward on an empty chamber. On “GO!” drop the mag into the support hand, and stow it. Grab the fresh empty mag from your pouch and seat it. Bring the gun up. Done.
Dry-Fire Malfunction Clearances
I legitimately don’t know a way to practice malfunction clearances dry-fire. Nor do I have any reasonable suggestions for time hacks to aim for. I can hit tap-rack-bang in less than two seconds. I only know that because I’ve seen the split occur when it has happened during shooting more complex drills.
What I typically teach guys to do for dry-fire of tap-rack-bang, is to seat a magazine, with dummy rounds, and simply do snap-drills, through the whole magazine of dummy rounds. You WILL master the instinct to tap-rack-bang when you feel the click. That only works for failure to seat and fail-to-fire malfunctions though, of course.
For more complex malfunctions, I like to set up the Three Little Kittens drill that SGM Kyle Lamb teaches (there’s a YouTube video of it, I believe, or you could avoid being a cheap fucker, and order his videos…). This is three different rifles down range (good excuse to get to shoot your buddy’s pimped out rifle…), each with a different malfunction set up. On “Go!” you move to the rifles, clear the malfunctions, and fire one round (To be honest, I haven’t watched the video in a while. That’s how I set it up).
Conclusions
Successfully hitting your target with your weapon’s fired projectile is the single most crucial skill in combat shooting—or shooting, period. Unfortunately, achieving that is not the total sum of all combat shooting skill. You need to be able to keep your gun in the fight, throughout the duration of the fight. That requires learning and practicing gun-handling core skills as well.
Go forth and do good things. Who does more is worth more.
Addendums
1. The new book, “FORGING THE HERO: Who Does More Is Worth More, A Tribal Strategy for Building Resilient Communities and Surviving the Decline of the Empire” has gone to the printer. I waited an extra week, because the cover art got hung up. It still hasn’t come through, because the artist had scheduling conflicts and didn’t get a chance to get it done. Hopefully, we’ll be able to make it a poster in support of the book, or something. The design is AWESOME!
2. Sam Culper and Forward Observer also have the artwork for a t-shirt that will be produced for MG, in support of the book’s message. So, all of you who have been bitching about getting your hands on some MG swag…it’s en route.
3. Finally, Gadsden Dynamics has the MG Underground Chest Rig in stock and available. I designed this because I couldn’t find a single rifle mag pouch set up that could be worn “concealed.” This is not going to work for “non-permissive environments” under a t-shirt. It was designed for “underground” urban work though. Think, “I’ve got to roll through a really shitty ghetto, and I’d really like more than one magazine for my rifle, on my person.” This, thrown on under a light jacket or button-down, untucked shirt, conceals really well, from as close as five feet away. It’s pretty slick, and they did a good job refining my design, and producing it.(In the interest of intellectual integrity, I get no percentage from sales of the product. I just wanted a piece of kit that would be useful to people, and I couldn’t find one that fit the bill. The guys were willing to design it and manufacture it. Go thee forth and procure one!)
https://gadsdendynamics.com/product/mg-underground-partisan-chest-rig/
-----------------------------------------------------------------------------------------------------------
-----------------------------------------------------------------------------------------------------------
No comments:
Post a Comment