Pages

Sunday, April 8, 2012

Effective gas masks

Here are some masks that I found through research that are effective and will provide you with actual protection in case you need it. I start with the least expensive and move to more expensive units. They start at about $170 and go to about $220.

SGE 400/3 NBC Full Face piece Respirator

The SGE 400/3 gas mask has 3 filter ports (left, right and center) and is offered with an optional hood and canteen drinking system. Soft inner orinasal cup quick release harness with six adjustable straps. Controlled air flow prevents fogging of the visor.

Unlike other mask designs, the full facial coverage offered by the Tecno-Pro mask provides wearers with full visability additional face protection from flying debris. The extremely durable polycarbonate visor has been tested to resist a one inch steel ball, that was propelled at 335 MPH without cracking or damaging the face shield. The mask was also tested for heat resistance and will not catch fire or melt at 800 Degrees C (1472 F) for 5 Sec. or 200 degrees C (372 F) for a duration of 6 Min.

The SGE-400/3 models have a special resin coating applied to the polycarbonate visor which provides additional scratch & chemical resistance. The competitive price, simplicity and the ease of maintenance of Tecnopro full face mask systems make them an easy choice.
SGE 400/3 NBC Gas Mask is NIOSH approved with an DP filter for NBC CBA RCA hazards 

SGE 400/3 Infinity NBC Mask System

SGE 400/3 NBC Gas Mask is NIOSH approved with an M95 filter for NBC CBA RCA hazards
The SGE 400/3 Infinity gas mask has 3 filter ports (left, right and center) and is comes with a canteen drinking system including the mouthpiece, drinking assembly, cap and US military current issue canteen. Soft inner orinasal cup quick release harness with six adjustable straps. Controlled air flow prevents fogging of the visor. Unlike other mask designs, the full facial coverage offered by the Tecno-Pro mask provides wearers with full visability additional face protection from flying debris. The extremely durable polycarbonate visor has been tested to resist a one inch steel ball, that was propelled at 335 MPH without cracking or damaging the face shield. The mask was also tested for heat resistance and will not catch fire or melt at 800 Degrees C (1472 F) for 5 Sec. or 200 degrees C (372 F) for a duration of 6 Min.

The SGE-400/3 models have a special resin coating applied to the polycarbonate visor which provides additional scratch & chemical resistance. The competitive price, simplicity and the ease of maintenance of Tecnopro full face mask systems make them an easy choice.

Evolution 5000 Military Gas Mask

The Evolution 5000 Military Gas Mask - 

Designed for military use, this respirator is also appropriate for tactical, law enforcement & civilian use. Manufactured in a fully ISO 9001 certified facility, this is a TRUE Military mask system. Consists of a butyl rubber face piece which resists all known chemical & biological warfare agents, a soft rubber inner mask/nose cup designed to minimize lens fogging, and a removable (olive drab) outer hood/second skin made of butyl coated nylon fabric. 

The mask can be used with or without the outer butyl hood. The face piece is stealth black & has impact resistant, optically correct, eye lenses. Equipped with voicemitter for clear communications.

 Comes with a brand new C2A1 long life 10 year stealth black filter canister. Side mounted filter position facilitates the use of weapons & other equipment. Designed to be worn for long periods, this mask has been tested, used & proven in combat & military operations. 

Available in medium or regular only. Additional features & extras: Integrated drinking capability for fluid ingestion in contaminated atmospheres. Works with standard issue U.S. canteens. A specialized self-sealing canteen cap and drinking tube connects the canteen to the drinking port on the face piece. 

Comes in (a.) water repellant olive drab drop leg style carry bag with compartments for all included accessories: (b.) NBC filter C2A1, 40mm stealth black aluminum; (c.) Butyl rubber coated nylon hood; (d.) Waterproofing bag to prevent moisture damage in wet conditions; (e.) Lens cleaning cloth in sealed container; Total weight: (complete kit in carrier with all accessories) 3.9 lbs.

Gask Mask information, read before you buy! PLEASE

 Please read this if you intend to prepare your self or your family for an NBC event. Also do not take this as the only gospel, there may be other opinions out there that may or may not be more correct.

Gas mask purchases are a personal decision each family must make. Educate yourself about gas masks to avoid a mistake that could cost you your life. Consider the following information before purchasing and purchase only from a recognized dealer or manufacturer.

A gas mask would only protect you if you were wearing it at the exact moment a bio-terrorist attack occurred. Unfortunately, a release of a biological agent is most likely to be done “covertly,” that is, without anyone knowing it. That means you would not know ahead of time to put on your gas mask.

To wear a gas mask continuously or “just in case” a bio-terrorist attack occurs, is impractical, if not impossible. To work effectively, masks must be specially fitted to the wearer, and wearers must be trained in their use.

This is usually done for the military and for workers in industries and laboratories who face routine exposure to chemicals and germs on the job. Gas masks purchased at an Army surplus store or off the internet carry no guarantees that they will work. In fact, one national chain of surplus stores provides the following statement: “(X) has been selling gas masks as a novelty item since 1948. We have never been able to warrant their effectiveness and we cannot do so at this time…

We do not know what each type of gas mask we sell might or might not be effective against…We do not know the age of each gas mask…” In brief, no guarantees whatsoever are provided. More serious is the fact that the masks can be dangerous. There are reports of accidental suffocation when people have worn masks incorrectly, as happened to some Israeli civilians during the Persian Gulf War. Military personal goes through extensive training in the use of gas masks. If you purchase masks, be sure to get properly trained in their use.

Become familiar with putting the mask on and using it correctly. If you are forced to use the gas mask in an attack, that would not be the best time to be donning it, for the first time. And again, KNOW what you are purchasing and understand that a gas mask that will actually work in an attack, will cost you upwards of $125.00

Let The Buyer Beware Information provided by Approved Gas Masks.com The truth about surplus gas masks: Many models of surplus masks & filters are available in nearly unlimited quantities at low prices. In most cases, these prices are low because the mask is either obsolete, recalled or replaced due to design flaws or defective components. Before buying a surplus mask, do your homework, take time to review recalled gas mask models. Here are a few of the most widely advertised surplus masks that should be avoided:

Russian Gas Mask: Unless you are assembling your Halloween costume, avoid this ineffective mask. Although the $19 price tag is enticing,
this mask is 30+ years old & does NOT provide NBC protection.

EVAC-U-8 Hood
Advertised by some unscrupulous vendors for protection
against NBC agents, this mask is actually intended for smoke/fire protection.
Over 27,4000 have been recalled.

Canadian M69 C-3 The entire Canadian military has removed the C3 from
service (replaced by a completely different model, designated as the C4)
The C3 60mm filter port does not accept NATO threaded filters without
plastic adapter.

If you own or intend to purchase one of these masks, YOU WILL have NO protection against ANY form of attack. They offer NO protection against: NBC -Nuclear, Biological, or Chemical agents. Many offer NO protection against even tear gas! Also old,(even sealed) filters may become toxic
GAS MASK: Russian/German M-10-M Protective Mask STATUS: INEFFECTIVE 100% obsolete DETAILS: Very old model. This type of protective mask should NEVER be used for protecting against any NBC warfare agents. USAGE: Designed ONLY for protection against tear-gas. (These will most likely not provide this protection as they are ALL more than 20 years expired)
GAS MASK: Russian M41 Aardvark Protective Mask STATUS: INEFFECTIVE 100% obsolete DETAILS: Complete waste of money. These Russian masks are a triumph in the world of completely useless gas masks, possibly the worst mask still being sold by unscrupulous surplus stores & internet vendors. USAGE: Russian / Outdated (over 20-30 years old) could be used as a Halloween costume or conversation piece but it will provide 0% protection.
GAS MASK: Russian SMS Snorkel Protective Mask STATUS: INEFFECTIVE 100% obsolete DETAILS: Complete waste of money. These Russian masks are another triumph in the world of completely useless gas masks, possibly the worst mask still being sold by unscrupulous surplus stores & Internet vendors. USAGE: Russian/ Outdated (over 20-30 years old) could be used as a Halloween costume or conversation piece but it will provide 0% protection.
GAS MASK: M9 or M9A1 Protective Masks STATUS: OBSOLETE/ineffective (made in the 50′s) Details: Uses a 60 mm threaded filter which is very hard to find with a modern & effective filter. USAGE: Tear Gas, Not used since 1960’s, these will provide NO protection, as they are 40+ years old.
GAS MASK FILTER: WEST GERMAN (various model #’s) STATUS: EXPIRED, HEPA ONLY. DETAILS: This filter is rated at 99.9% HEPA filtration and prior to expiration would be effective against P100 (small particles) agents. Examples: Tear Gas, Unmodified Simple Anthrax & other other non-micronized biological agents. Ineffective against ALL chemical warfare agents. USAGE: German mfg. for riot & tear gas protection. Manufactured prior to 1980, all lots are EXPIRED.
GAS MASK FILTER: AMERICAN M-9 (circa 1940) 60 mm threaded filter STATUS: 100% EXPIRED DETAILS: Common American issue. (Most from the 50′s) USAGE: US issue during prior to 1950. Use of this filter is highly discouraged, it provides 0% protection and may be toxic on it’s own.
GAS MASK FILTER: AMERICAN C2 (check exp. date) & C2A1 STATUS: EXPIRED -If more than 10 years old ** (old filters are known to have Chromium Toxicity ** and are considered highly dangerous) DETAILS: To find out if your filter is expired, you must find the printed date of manufacture. Look for the serial number on the can: For Example: RFT 920000CF24054 (sample serial #) (first 2 digits are the year of manufacture) In this example the mfg date: RFT [92] is 1992
These are 100% military surplus filters. The military discontinued use of the C2 in favor of the new/better C2A1 filters.
But Caution: C2A1 filters provide no protection against ammonia based agents. USAGE: Obsolete/US Military Surplus only. Recommended to upgrade to a MSA or M95 filter( the same threads/mask fitting). Both protect against all NBC agents and are 100% current issue / used in federal agencies, etc.

This article was found here: http://www.nationalterroralert.com/gasmasks/